Currently Empty: $0.00
Delivery and return
Delivery and return
| Standard Delivery (Signed for) | Delivered within 3-5 working days |
| Express Delivery (Standard Parcels) | Delivered within 1-2 working days |
| Extra-Large Parcels (Signed for) | Delivered within 3-5 working days |
| Note | Delivery handled and operated by Amazon. |
Shipping Information
Shipping Information
Free Shipping
Shipping handled and operated by Amazon.Drop Shipping
Shipping handled and operated by Amazon. Ground Shipping
Shipping handled and operated by Amazon.
Description
Product Description
Sully Products provides specialized accessories for products such as Texas Instruments, Arlo, Reolink, Blink, Nest & Ring. You can count on us for factory direct value and highest quality.
Factory Direct ValueIt’s amazing how much you can save if the products are direct from the factory. We offer factory direct value. You will always get a deal if you purchase from Sully Products Highest Quality Products Our products are made from the highest quality plastics and silicone. Each piece of the product is vetted by hand from our quality control process
Compatible for Almost All the Baby Monitor in the Market
With the 1/4″ screw mount on the Sully baby mount, you can install any camera or monitor with it. If your monitor doesn’t have the screw hole, no worries, you can still install your baby monitor with the key shaped hole at the base of the monitor.
NO More Messiness
We help you take care of the mess. There are 3 hinges underneath the mount. You can tie your cable around the hinges in order to shorten the length of the cable.
Install with Ease in Multiple ways
For more security, you can choose to install the mount by screwing onto the wall. Alternatively, you can use the 3M tight stickers to stick on it.
[SUITABLE FOR MOST BABY CAMERAS] This baby monitor holder can mount most infants cameras in the market, including Infant-Optics DXR 8 DXR 5, Arlo Baby, Babysense, Hello Baby, Motorola MBP36, Summer Infant, and Philips Avent
[PUT YOUR BABY CAM AT BEST POSITION] The wall mount for baby monitor can place the video camera at the best position. No matter on the wall’s corner or Curb’s side, this baby camera holder can be installed on the surfaces securely.
[MULTIPLE INSTALLATION METHODS] The baby monitor shelf includes super tight stickers & screws, which can firmly install the Infant Optics Camera Mount in multiple methods. Install your Baby Cam anyhow with ease!
[CABLE CONCEALMENT] This baby monitor stand is designed with hinges at the buttom, which shortens the cable length and conceal the cable perfectly from sight. This Arlo Baby wall mount facilitates better cable management and prevent infants from reaching to the cables.
[FIRMLY SECURE YOUR CAM] The baby monitor crib mount has a 3 1/3’inch screw that fits your video camera, which prevent the cam from slipping off. This corner camera mount provides strong and secure support for your infant monitor camera.
Quality mount
Great camera mount. Comes with nice cable anchor points, and all sorts of mounting options. Included there is double sided adhesive or screws for more permanent mounting. Do note, if mounting permanently, one must screw into wall before attaching camera. 1/4 inch screw is fixed and does not rotate. Installation can be tool-less if using adhesive strips.
Easy to install, great for small cameras
This corner shelf is sturdy, well made and flexible enough to fit into most corners. It could be a bit cheaper given the material is plastic – maybe they could make a 2 or 3 pack for 30$. But as is, worth it.
Very Affordable
It’s very affordable but the quality is also great. All the holes were drilled in properly so there was no issue with installing the mount. I recommend this because it is good value for the price.
Happy with it
Works well.
Not worth $17: fell off wall, not compatible as described
Fell off the wall the first time we tried it with double sided tape.Was advertised to mount infant optics camera but it does not?Discounted given high price
Not very well designed
The unit is poorly designed. Our camera screwed on but the connector wouldnât fit when attached to the wall. I had to cut the corner out so we could install. Attaching the unit to the wall makes it nearly impossible to screw the camera on and then get the plug into the camera. Iâm sure there is a better design out there.
Difficult to mount
Edges are angled, how you suppose to get it mount flush to corner wall? Adhesive dont seem strong enough either.
Makes installation very clean and profesionnal
Iâm using this support with a wireless camera to check on my dog while not at home. The support bracket has a small down angle that letâs you see down better.. The plastic is good quality and it feels solid. This is a great ideal found on Amazon.
Use the hardware or command strips! Pls donât use the stickers Iâve seen a couple reviews where camera fell off the wall broke or fell on a baby! It does have a gap like everyone says but itâs also supposed to tilt down quite a bit donât let that scare you it works for what itâs intended sturdy (with the screws) for the price I do think it was worth it. The photo above is the camera set up on the mount.
This mount is just what I needed for the babysense camera we have. I use 3M Command strips to mount it instead of the supplied hardware so I can remove it anytime. The camera now sits at a perfect angle!
I thought this was the greatest thing ever when buying this. When I got it, I realized it didnât fit flush against a wall but it also defeated the purpose of itself because when using it, I wasnât able to see all the angles my camera can reach. I ended up âmountingâ the bottom of the monitor mount to the wall instead of the actual designated sides just go be able to get every angle of my babyâs room. Granted, I didnât have a corner to put the mount (no outlets near a corner wall) so it maybe could work better for someone who does, but it just didnât work for us. Itâs pretty durable though, so thatâs a plus.
This is the second product I’ve got from them and its another success. Tray is perfectly easy to install into a corner above the crib, and the three cutouts do allow the cords to remain tidy beneath the tray, which is a nice touch. Can’t have hanging cables near the baby! I think all screws for the cameras are universal, but that is the only thing I’d be sure to check prior to ordering. My arlo cam fit fine into the screw fine, but it’s the only thing I could see going wrong. (I do wish the screw was not fixed to the tray but something I could tighten myself). Otherwise, its a good tidy solution for a better angle for crib cam.
After reading some other reviews, Iâll say1. No it didnât come with instructions but if you even have a quarter of common sense you can figure it out.2. There is one extremely livid mother who had her mount fall off the wall and hit her baby in the head. I would be livid too BUT after looking at the pictures she posted, it looks like she only used the sticky strips and not the screws. Which was a big mistake. The sticky strips it comes with are useless. Maybe use command strips if you donât wanna use the screws.My own personal complaints, the mount didnât fit in the corner of my babyâs room. One side would lay flush with the wall and the other side had a gap. So that was annoying, but workable. But it tips down, and looks like itâs going to fall off the wall even though I know it wonât since I DID use the screws (cause Iâll take holes in the walls over it falling on my babyâs head ). Is it suppose to tip like that? Is that part of the design so thereâs a better angle for viewing the crib? Idk. But in the end it does what itâs suppose to do.