$36.99

Buy Now

Delivery and return
Delivery and return
Standard Delivery (Signed for) Delivered within 3-5 working days
Express Delivery (Standard Parcels) Delivered within 1-2 working days
Extra-Large Parcels (Signed for) Delivered within 3-5 working days
Note Delivery handled and operated by Amazon.
Shipping Information
Shipping Information

Free Shipping

Shipping handled and operated by Amazon.

Drop Shipping

Shipping handled and operated by Amazon.   Ground Shipping
Shipping handled and operated by Amazon.

Description

Product Description

Ankilo

How to connect

Three transmitters are exactly the same, so to be divided into 1, 2, 3, you need to dial the mark on the back cover of the transmitter to 1, 2, 3, and then power 2AAA battery, the transmitter indicator will light up red, the host will be connected to 1, 2, 3. If one certain not connected, wait the next red light, it will be connected.

RF transmitter receive period; No. 1 = 57 seconds, No. 2 = 67 seconds, No. 3 = 79 seconds

Button function

RF SEARCH/CHANNEL key:

1. In standard mode, single press this key to select the channels (select the channel temperature and humidity markers flashing).

2. In the selection of any channel of the receiver, long press this key for 3 seconds to re-open or close the channel of signal reception.

3. In the absence of any channel selection, long press this key for 5 seconds, the receiver 3 channels will be turned on or off at the same time.

MAX/MIN key:

1. In standard mode, single press this key to view the maximum and minimum temperature and humidity values of the current four channels (when viewing the maximum and minimum values, only the channel logo and temperature and humidity are displayed, the other is not displayed).

2. In standard mode, long press this key for 3 seconds to turn on or off the 24hrs function (when the 24hrs logo is turned on, the temperature and humidity will be automatically zeroed for 24 hours; when the 24hrs logo is turned off, the maximum and minimum values of temperature and humidity will not be zeroed).

3. When viewing the maximum and minimum values, long press for 3 seconds to clear the current maximum or minimum values.

℃/℉ key:

In standard mode, single press this key to switch the display of ℃ and ℉.

LIGHT key:

When battery powered, single press the backlight display for 15 seconds.

When cable powered, press this key to adjust three levels of brightness; Full light, half light or off.

Parcel Dimensions ‏ : ‎ 12.7 x 12.6 x 9.1 cm; 360 g
Date First Available ‏ : ‎ Dec 28 2022
Manufacturer ‏ : ‎ Ankilo
ASIN ‏ : ‎ B0BR6H2CN5
Manufacturer reference ‏ : ‎ WA100-MA06CA

【UPGRADED INDOOR OUTDOOR THERMOMETER】4.6in large LCD display shows clear numbers and wide view. When battery powered, press the display backlight and it will turn off automatically after 15 seconds. When cable powered, press the display backlight and you can choose three backlight modes, full light, half light or off.
【3 WIRELESS SENSORS】 With 3 remote sensors, the wireless thermometer hygrometer can display 4 different temperature and humidity simultaneously. You can put the sensor in anywhere you want.
【WIDE TRANSMISSION RANGE】 The indoor/outdoor thermometer range; Indoor: -20℃~70℃ (-4℉~158℉); Outdoor: -50℃~70℃ (-58℉~158℉); Humidity range: 10%~99%; Transmission range: 100M/328ft (open area). humidity 😐 showing less than 45% for dry, 😊 showing 45%-65% for comfortable, and 😢 showing 65% or more for wet. It can record max and min temperature and display up, down & parallel arrow to indicate the trend of current temperature and humidity.
【TWO POWER SUPPLY MODES】We prepared two power supply modes for you. You can choose battery power supply or cable power supply (included), when both are used, the cable power supply is preferred. The cable is Apple cable, which is very convenient to use.
【MULTIPLE MOUNTING OPTIONS】 This indoor and outdoor hygrometer thermometer supports base, magnetic back and wall hanging, transmitter equipped with lanyard and suction cup, very easy to place.

Reviews

  1. Very accurate
    When I bought this weather station, I did a lot of research, and I am so satisfied with it. It actually gives the most accurate temperatures of all stations I had in the past. All the sensors seem to be coherent with each other. It is sometimes a bit more difficult to read, as it has no colors on the screen, so you need to put a bright lamp close to it to be able to read the numbers from a distance. But all in all, very happy with it!!

  2. One sensor is way out or range
    It arrived well packaged and quality seems good, but while setting it up I noticed that the #3 sensor runs 3.9 to 4.2 degrees lower than the others when they are all in the same room beside each other and after they have been given an hour to stabilize. Also humidity shows 4-6% higher on that sensor. I have tried changing the batteries in that sensor and moving it around in relation to the base station to see if there is a draft or some other problem but the results are the same. I hate to return it and have it be sent to a land fill, I can understand a minor error and would be happy if they were all within 1/2 degree but this is too much. If you are only looking for a general idea of the temperature and accuracy is not important they may work for you. I guess I will be looking for a better quality unit. UPDATE; now sensor #3 has died completley so it’s going back to Amazon.

  3. Worked week but don’t last long
    Worked for not even 1 year. Noticed one not working properly and they are mounted inside my greenhouse. Took it down to see if batteries were needing replacing to find the reason it was reading temp and humidity wrong and it was not changing is that a chip had come loose. It seems it’s not soldered very well. Disappointing as it was convenient to not have to go into greenhouse to see readings.

  4. Super!
    Fonctionne très bien.

  5. Works
    Works as intended.

  6. Parfait
    Parfait

  7. Problème d’affichage
    l’affichage de la troisième sonde ne marche pas

  8. Nice easy to read display.
    Overall the unit works pretty good. Easy to read display, very user friendly. Two of the three transmitters are located indoors, one in my attached garage the other in the basement they work well, the third is outdoors in my cargo trailer located about 65ft from the receiver, doesn’t register a reading a lot of the time even though the batteries are fresh. It’s nice to be able to plug the receiver in to a wall outlet, saves having to use batteries. Overall happy with this unit.

Add a review

Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
  • Image
  • SKU
  • Rating
  • Price
  • Stock
  • Availability
  • Add to cart
  • Description
  • Content
  • Weight
  • Dimensions
  • Additional information
Click outside to hide the comparison bar
Compare